Tag Archives: Industrial RO System

Brackish Water Reverse Osmosis (BWRO) Systems : E-ROTEK WATER SYSTEMS CO., LTD

By | March 2, 2021

Brackish Water is classified into three categories: Slightly brackish with TDS ranging from 1000-3000 ppm Brackish Water with TDS ranging from 3000-10000 ppm Highly Brackish Water with TDS ranging from 10000-15000 ppm Now let us take a look at the industries where the brackish water RO system is applicable: Food Industry, Car washing Industry. Please read the originial… Read More »

Brackish Water RO system – E-ROTEK

By | March 2, 2021

Brackish Water is generally termed as the water which has a very high amount of TDS between 10000 to 15000 milligram/Litre. So, to consume it is like consuming harmful minerals and putting your life at risk. Industrial brackish water RO system is used to lower down the ultra-saline levels of water to a normal level. Reverse Osmosis is… Read More »

Brackish Water Reverse Osmosis (BWRO) Systems

By | January 4, 2021

On the same mechanical principle, both water purifiers and water filters work. The first filter out impurities ranging from micro-organisms to sediments after sucking up raw contaminated water and then dispense clean water. However, between the two, there is one big difference – a purifier can remove bacteria and viruses that filters cannot remove. To kill or capture… Read More »

Brackish Water RO system Taiwan

By | October 1, 2020

Pressure switches are fitted on the reverse osmosis feed and flow monitors on the concentrate, permeate and recycle stream. In larger systems, the cleaning cycle is automated with automatic valves. Pre-treatment is required for all systems which are designed to eliminate suspended solids, water hardness, chlorine, and other oxidizers. Deposits of calcium and magnesium can plug the membrane.… Read More »